Verification
SDX results beside the worked examples printed in each county’s hydrology manual, and beside WSPG for storm drain hydraulics.
Riverside County
RCFC&WCD Hydrology Manual (1978), Section E, Sample Calculations 1 and 2
| Value | Manual | SDX |
|---|---|---|
| Sample 1, 3-hour storm, peak flow | 1,093.8 cfs | 1,101.1 cfs |
| Sample 1, effective rain | 0.94 in | 0.93 in |
| Sample 2, 24-hour storm, peak flow | 505.3 cfs | 505.5 cfs |
| Sample 2, effective rain | 1.52 in | 1.50 in |
| Loss rate Fp at RI 69 (Plate E-6.2) | 0.37 in/hr | 0.37 in/hr |
San Bernardino County
Hydrology Manual, 2026 Edition, Section 4.4 example
| Value | Manual | SDX |
|---|---|---|
| Initial time of concentration | 21.0 min | 21.0 min |
| Intensity at 21.0 min | 2.52 in/hr | 2.52 in/hr |
| Peak flow at node 12 | 19.4 cfs | 19.4 cfs |
| Peak flow at node 13 | 36.9 cfs | 37.0 cfs |
| Confluence peak at node 14 | 72.1 cfs | 72.1 cfs |
| Time of concentration at node 14 | 24.4 min | 24.4 min |
Los Angeles County
Hydrology Manual (2006), Sections 7.3, 11.1 and 12.2
| Value | Manual | SDX |
|---|---|---|
| Intensity, 5 in at 12 min | 1.98 in/hr | 1.98 in/hr |
| Runoff coefficient Cu, soil 068 at 1.98 in/hr | 0.58 | 0.58 |
| Time of concentration, Section 11.1 | 17 min | 17 min |
| Time of concentration, Section 12.2 | 8 min | 8 min |
| Peak flow, Section 12.2 (67.7 ac) | 350.3 cfs | 349.8 cfs |
Orange County
Hydrology Manual (1986), Table D.1 example
| Value | Manual | SDX |
|---|---|---|
| Area-averaged loss rate Fm | 0.147 in/hr | 0.148 in/hr |
| Fm for soil B, 40% impervious | 0.18 in/hr | 0.18 in/hr |
San Diego County
Hydrology Manual (2003), Figure 3-1 and Workbook Examples 1 and 2
| Value | Manual | SDX |
|---|---|---|
| Initial time, Figure 3-1 example | 9.5 min | 9.5 min |
| Time of concentration, nodes 11 to 12 | 13.2 min | 13.3 min |
| Junction peak flow, Example 1 | 33.1 cfs | 33.1 cfs |
| Junction peak flow at node 14, Example 2 | 33.3 cfs | 33.3 cfs |
Storm drain hydraulics
Water surface elevations on three storm drain lines from a project in Redlands, run in WSPG and in SDX from the same input.
| Location | WSPG | SDX |
|---|---|---|
| Line C-2, upstream end | 1186.265 | 1186.264 |
| Line A-2, upstream end | 1180.297 | 1180.296 |
| Line A-2, bend at 100+35.24 | 1179.717 | 1179.716 |
| Line C-1, bend at 10+50.66 | 1185.930 | 1185.930 |
| Line C-1, bend at 10+31.01 | 1185.725 | 1185.726 |
Elevations in feet. On Line A-2, WSPG places the hydraulic jump at station 101+55.99 and SDX at 101+56.03.
These are checks of the program’s arithmetic against published numbers. They do not replace the engineer’s own review of a design.
SDX has a 14-day free trial. Trial printouts are marked Not for Submittal. Start a free trial